MPAR V01 - PRO Acryl Spray - Clear Matte Varnish

The best quality in the biggest cans equals the best value!

Our Clear Matte Spray is the best final touch to make sure your paint job is protected for use on the table or displayed for all to see. 

PRO Acryl Sprays are the best and quickest way to prime and seal your latest projects! In partnership with The Colour Forge, we've formulated the ultimate matte finish sprays for use on plastic, resin, and metal models. No matter if you're looking to paint a full army of the Emperor's finest or doing your first 3D print, we've literally got you covered! 

Each can of PRO Acryl Clear Matte Varnish Spray is 500 ml of the highest quality varnish you'll find!

For the best results when spraying:

1. Shake the can thoroughly for 2 minutes.

2. In colder conditions, pour warm water over the body of the can to bring it up to room temperature.

3. Always spray on a test surface to ensure proper operation.

4. Hold spray 12 inches from model and use short passes over the uncovered areas until the model is covered.

5. After use, rotate the can so it is upside down and spray until clear, this reduced the chance of nozzle blockages.